1:35 Scale unless otherwise stated P35-074 Detail set for Sd.Kfz.222 (For Tamiya) New sets by Passion Models under the title "Jenny's Clamps" Designed in cooperation with Jenny Ryan (Tanks & Things) Press release: Why ? Because for two long modellers have been trying to stick tiny scale pins into the latch of the clamp , juggling four while trying to allign and then close the latch !!! Frustration to the max !!!! Soooo I had an idea , shared it with my friend Manabu San from Passion models , we have refined the design and thus the Jenny clamp was born , the pins on the left hand side are 3mm longer with a fold line at the correct size , the pins on the right hand side are about half this length also with the fold line . Assembly is straight forward , fold the base as usual , fold the latch as normal but leave it slightly ajar . Insert the left hand base pin into the latch , fold the pin over making this side captive , do the same with the top part then align the other side which can also be bent upwards . There is no way that the catch can come apart now . It is designed so that the clamp can be added to the vehicle , the tools and vehicle can then be painted seperately , making tool detailing easier and not leaving a void in the cam around and under the tool position . the tool is then added to the vehicle , a small drop of superglue and close the catch , now trim the excess pin length with zuron scissors and maybe just a small dot of paint on any shiny bits ! P35-075 Jenny's Clamps A (early types) P35-075 Jenny's Clamps B (late types)

See the M.S.Models website for ordering details.