PMMS
Logo
Bolt & Nuts
1:35 Scale
Accessory Set #35048 1.3 mm
Accessory Set #35049 1.1 mm
Accessory Set #35050 0.95 mm
Accessory Set #35051 0.8 mm
Accessory Set #35052 0.65 mm
Reviews by Terry Ashley

Calibre35 have released 5 sets of resin Bolts & Nuts with nine different styles in each set for a total of 360 pieces in each set for a plentiful supply.

The parts are cleanly cast in light grey resin without any blemishes such as air holes on any of the parts even the very smallest size bolts.

Each set has eight different bolt/nut/washer combinations and a separate individual hex nut all cast with good definition to provide just about any combination you may find on different vehicles and equipment.

The sizes range from the smallest in set #35052 at 0.65mm, set #35051 at 0.8mm, set #35050 at 0.95mm, set #35049 at 1.1mm and largest set #35048 at 1.3mm again to cater for most sizes for various applications.

Each part is cast on a small 'stem' and to use you can either drill a small hole at the required location and insert the 'stem' or simply cut off the part flush and glue in place with a small dab of cyanoacrylate whichever you find more convenient.

Image showing the various styles in each set
The same styles for each set only at the different sizes.

Calibre35
Calibre35

Conclusion:
Five very useful easy to use and well cast accessory sets with the 360 parts in each set providing plenty of bolts that can be used in virtually any situation from vehicles to structures to equipment.

Highly recommended for vehicle and diorama builders.

Thanks to Andrew of SouthEast Hobbies for the review sample.



Page Created January 22, 2006

Click Browsers BACK button to return to list
Home / Reviews / Vehicle Reviews / Calibre35