Bronco Models
British 17pdr Anti-tank Gun Mk.I
Bronco Models 1:35 Scale Kit No. CB-35024
backnext

Assembly Images
Note; these images are of the carriage parts only for clarity without any other parts added that would be there during
the actual kit assembly, they are also only assembled using Blu-Tack in this guide.

Firstly fit the top locating pin on each trail arm up into the recess in the top section (part B38)
and then glue the lower section (part B37)  into place ensuring you don't accidentally glue the trail arms.

BroncoBroncoBronco
You then fit the two axle stubs (parts C10) into the part B38 recesses (note direction of axle stub) and secure with underside bracket (part B12)
BroncoBronco
Ensure the central holes for the gun assembly are perfectly aligned to avoid fitting the carriage pin.
Bronco
The excess plastic in the guide channel has to be removed to allow proper fitting
Bronco
The upper carriage/gun assembly has to be fitted at the same time as you attach part B15 to the lower carriage as the lip on the front of the upper carriage base
(part B34) has to fit into the guide channel inside part B15 as you fit this to the lower carriage.

BroncoBroncoBroncoBronco

backnext



Back to Top