M22 Locust (T9E1) Airborne Tank (British Version)
Bronco Models 1:35 Scale Kit No. CB35161
Page 1 of 4
Detail ImagesBasic lower hull Interior.
Basic suspension added to the hull
Holes in the hull sides that needs to be filled before attaching the suspension bogies
1 on the left and 2 on the right hull sides.
Drive sprocket detail and cut-outs in the hub.
Idler and suspension bogie detail, the one piece idler wheel is a superb piece of moulding with only fine mould lines to be lightly sanded.
Modifications to the drive sprocket by adding a central pin from 1.6mm plastic rod which is inserted into a corresponding holes drilled through the final drive housing for a very robust fit also allowing the sprocket to rotate freely.
Note: this is an optional modification and the kit sprockets will assemble as per instructions, I simply made this alteration to
make fitting the sprockets easier and for a more robust attachment, it's up to the individual if they wish to follow suit.
