Bronco Models
US M22 Locust Airborne Tank (T9E1)
Bronco Models 1:35 Scale Kit No. CB35162
Page 1 of 2
backnext Detail Images
Note: these images are from the British version but are the same for the US version other
than the tow shackles which are the simpler single hole type for the US version

Basic lower hull Interior.
Bronco Models
Basic suspension added to the hull
Bronco Models
Bronco Models
Holes in the hull sides that needs to be filled before attaching the suspension bogies
1 on the left and 2 on the right hull sides.
Bronco Models
Drive sprocket detail and cut-outs in the hub.
Bronco Models
Idler and suspension bogie detail, the one piece idler wheel is a superb piece of moulding with only fine mould lines to be lightly sanded.
Bronco ModelsBronco Models
Modifications to the drive sprocket by adding a central pin from 1.6mm plastic rod which is inserted into a corresponding holes drilled through the final drive housing for a very robust fit also allowing the sprocket to rotate freely.
Note: this is an optional modification and the kit sprockets will assemble as per instructions, I simply made this alteration to
make fitting the sprockets easier and for a more robust attachment, it's up to the individual if they wish to follow suit.

Bronco ModelsBronco Models
backnext



Back to Top