US M22 Locust Airborne Tank (T9E1)
Bronco Models 1:35 Scale Kit No. CB35162
Page 2 of 2
Detail ImagesThe driver's instrument panel added inside the hull.
Link and length track added to the suspension.
The pioneer tools and exhaust assembly added to the rear fender, extensive use of etched brass adds finesse to these assemblies
but does require care during assembly.
Mould line around the gun mounting that will require care in removing.
1. Firstly glue the bracket parts (A21, A23 and A21, A22) together while separate from the inner gun mounting (part A50). Once these small brackets have dried glue the left side bracket (parts A21, A23) to the locating recess on the inside of the turret face and let dry completely making sure it is seated snugly in the recess.
2. Once this sub-assembly is dry slip the inner gun mount (part A50) into place and 3. glue the right side bracket (parts A21, A22) into the turret recess making sure not to get any glue on the gun mounting and leave this assembly to dry completely before proceeding.
Turret basket assembly.
