Drive Sprocket details
Hobby Boss

Bronco

Comparison with Hobby Boss LWS drive sprocket.
Diameter of Bronco spocket is correct at the stated 660mm (19mm in 1:35)
while the Hobby Boss sprocket is undersized at 16mm in diameter.

Idler wheel and retirn roller parts
with idler mounting brackets

Bronco Idler and return rollers

Bogie/road wheel parts Bronco (left), Hobby Boss (right)

Comparison of the road and idler wheel sizes with the Hobby Boss LWS kit wheels
the Bronco road wheels are the correct scale size of 500mm (14.3mm) while the Hobby Boss
wheel is slightly undersized at 13.5mm and lacks detail.
The actual Idler wheel diameter is stated at 710mm (21mm in 1:35)
The Bronco idler is 21mm in diameter while the Hobby Boss idler is 19.5mm in diameter.

Assembled bogie and drive sproket attached to lower hull
Bronco (left), Hobby Boss (right)

Idler wheel miss-alignment adjusted

Propellor parts
Note incorrect non-counter rotating Hobby Boss screws (right)
which arte depicted correctly on the Bronco screws (left)

Next >