Tank Recovery Vehicle M32B1
Tasca 1:35 Scale Kit No. 35-026
Page 1 of 4
Lower hull assembly with engine bulkhead.
Winch, floor and side storage boxes added.
Separate winch door closed.
Basic transmission cover assembly showing good fit.
Lower hull with transmission cover added.
For demo purposes, this shows the Academy transmission from their M12 kit added to the Tasca hull
for those wishing to include this detail, note very little can be seen throught the top crew hatches.
The front of the Academy transmission needed quite a bit of trimming to fit into the inner Tasca hull contours.
I used the Academy transmission simply because this was already assembled from a previous project
but any available transmission could be used with similar tirmming to fit the Tasca hull.
Alternate bogie spacers, the felt blocks and fixed plastic spacer.
Assembled front bogie with lockout bracket fitted.
This is only fitted to the first and last bogie when the boom is raised for
lifting heavy loads.
Right drive sproket with cable drum.