Engine parts and assembled engine with standard #11 blade to illustrate the small size.
Assembly of front wheel spokes.
1 .Lay the etched spokes textured side down on the jig (note small jig pin).
2. Place the small wheel hub over the jig pin.
3. Press down the hub to form the spokes to shape
Assembly of rear wheel spokes.
1 .Lay the etched spokes textured side down on the jig (note large jig pin).
2. Place the large wheel hub over the jig pin.
3. Press down the hub to form the spokes to shape
Wheel spokes bent to shape using the jig provided,
again with standard #11 blade to illustrate the small size
Wheels assembled with spokes and central hub in place
Front wheel forks, one fork cut off to make fitting to wheel easier
and then glued back into position after fitting to front wheel.