A13 Mk.I/Cruiser Tank Mk.III
Bronco Models Kit No. CB-35025
1:35 Scale
Suspension Detail
Suspension parts
Suspension assembly, note different angles on hull side springs
and rear spring attached to outside hull panel with idler axle.
Outer hull panel and final drive attached.
Road wheels
Idler wheels
Drive sprocket/final drive parts
Drive sprocket inner etched disc have to be bent to cone shape with the ends soldered together for more strength.
Drive sprockets inner etched disc attached.
You have to ensure the discs are flush with the sprocket centre, some light filing may be needed.
Assembled Drive sprockets added to final drives.
Note additional etched parts added to the final drive mounting and hull end plate (left).
Tracks fitted around the drive sprockets (right) show a tight fit resulting in slight bending of the tracks
and a thin shim of plastic card could be added between the drive sprocket halves to widen slightly
or the drive teeth can be thinned a little, which ever is easiest.
Next >
Home / Reviews / Vehicle
Reviews / Bronco Models