PMMS
Bronco Models
A13 Mk.I/Cruiser Tank Mk.III
Bronco Models Kit No. CB-35025
1:35 Scale

Turret details/assembly
Main turret parts.

Bronco Models
Cupola parts, note all small panels are different and it's advisable to write the part numbers on the
parts before removing from the sprues to avoid any mix ups.

Bronco Models
Assembled cupola, fit is good overall but watch the instructions as they are confusing on what parts go where.
Bronco Models
The parts to attach the gun mantlet are very small and it is easiest to first glue the right attachment part H34
in place and let dry completely before fitting the gun mounting.

Bronco Models
You then slip the gun mounting into place and add the left attachment bracket (part H34)
ensure you don't get glue onto the mounting pin if you want the gun to elevate after assembly .

Bronco Models
Final turret assembly, fit of the panels is very good due to the bevelling on the joins leaving no trimming or filling required.
Bronco Models
Additional images of turret assembly showing good fit of the parts.
Bronco ModelsBronco Models
Front view of turret, note Vickers co-axial MG barrel needs to be drilled out for a better appearance.
Bronco Models
Turret ring attachment notches that just clip into the hull turret ring
without the conventional turret ring cut-out notches.
This view also shows the panel join notches as mentioned in the review text.

Bronco Models

< Back


Home / Reviews / Vehicle Reviews / Bronco Models