 M2A1 Half-Track 2 in 1 Dragon 1:35 Kit #6329 |
 M4 81mm Mortar Carrier Cyberhobby/ Dragon Kit #6361 |
Additonal details
Updates added to bogies
1. A hole with raised lip should be added on both sides of the main bogie housing.
I added these by drilling a small hole and adding the lip from thin wire.
2. Four hex bolts added to return roller supports.
3. Four small rivets added to front of bogie arms.
Also note that on some bogie housing covers there are casting numbers,
others have an oval hole in the housing and others are plain like the kit parts
if you wish to add a bit of variety to your bogies.
Exhaust bracket added from thin card,
also note the filled in idler spring mount for the early Tunisian Half-track
Real images courtesy of Toadman's M2 Halftrack Photo CD
Additions to driver's station
Driver's foot pedals from thin card, bolt heads from Calibre35 set #35052 and gear levers from wire
Real images courtesy of Toadman's M2 Halftrack Photo CD