Nuts & Bolts
Set #AG135
Review by Terry Ashley

---

Each set has ten sprues with three different sized nuts & bolts on each sprue for a total 80 of each size.

Using the nuts & bolts is easy, take a sharp scalple blade and gently 'slice' the bolt/rivet required from the sprue, do this slowly so they don't simply take off into the void.

Before attaching to the model it's best to use a soft pencil and mark out the location of the bolts and attach each with a small dab of liquid cement.

A useful accessory that will find many uses when adding details to your models.

Thanks to M&Models for the review samples.

Page created 26 June 2004