Opel Blitz Wheels
#MP 35-122
Review by Terry Ashley

---

The wheels are cast in a light cream resin with very nice rim details and well defined tread pattern on the tyres although there is some minor distortion around some of the outer edges of the tyre that may require of a bit of light sanding to correct, this could give the impression of uneven tyre wear so all is not lost. There is the usual casting blocks and a bit of thin resin film in the rim holes on the rear wheels to be removed before use.

The two front wheels have very good hub details with well defined lightening holes and bolt details while the rear wheels are cast with the inner wheel having the centre hub extension that fits into the hole in the centre of the outer wheel. This allows the outer wheels to have the lightening holes included for good definition and as mentioned there is a bit of resin film to be removed from these holes. A third outer rim is included for the spare wheel and the wheels easily fit onto the kit axles.

Recommended.

Page created 8 January 2004