MiniartMiniart
German Passenger Car Typ 170V Saloon 4 Doors
Miniart 1:35 Scale Kit #38008
Personenwagen Typ 170V Saloon
Miniart 1:35 Scale Kit #35203

Page 1 of 3
backnext Detail Images
Tyre segments and central rim with separate hub cap
Miniart
Tyre/wheel assemblies.
Miniart
Assembled engine.
Miniart
Assembled transmission.
Miniart
Rear suspension with springs held in place by shock absorber arms, these can be glued at each end to keep properly aligned.
The part PE5 is first glued over small notch on axle and secured with parts B24,B25 before bending the PE.

Miniart
The PE strap can then be bent around the axle and secured to the suspension arm.
Miniart
The two link arms and inner wheel hubs are then added to finish off the rear suspension.
Miniart
The front suspension is a straightforward assembly, but note the fixed axle stubs,
if you want the wheels turned these will need to be cut away and re-glued in the desired position.

Miniart
Final assembly of front suspension with link arms, steering rod and wheel hubs added.
Miniart
The engine assembly can then be added to the chassis, the fit is nice and snug, note the recess that fits over the chassis cross member.
MiniartMiniart
Overall view of the assembled chassis frame with engine, front and rear suspensions and the long drive shaft fitted, all without any fit issues
Miniart
Front bumper bar and fender supports added.
Miniart
Muffler and exhaust pipe added, note locating points for the PE brackets.
Miniart
backnext



Back to Top