Hummer Weapons Carrier Detail Set
1/35 Kit No. 1976
Verlinden resin doors are not tall enough and leave a large gap
between the door and Tamiya roof.
The rear resin door is way too small and the wrong shape to fit
the Tamiya body and is basically unusable on the Tamiya kit.
The etched radiator louvers are short by 2mm
and slightly too narrow when fitted to the Tamiya hood.
The resin rear hatch is about 1.5mm too narrow
when fitted to the Tamiya body.
The internal etched latch mechanism can be used on the Tamiya hatch.
