Hummer Weapons Carrier Detail Set
1/35 Kit No. 1976
The top weapons ring doesn't fit the Tamiya roof and even using the inner securing ring
(Tamiya part F1) the resin ring still moves about.
The images show the resin ring sitting in the Tamiya roof (left),
the resin ring overlaid on the Tamiya ring (middle) and
The inner view showing the resin ring is a bit over 2mm too small all around (right),
even fitting part F1 plugs the visual gap but the resin part is still by about 1mm
too small and flops about the place.
